STL Animerade Godsvagnar ... - Svenska 3D-Tåg

dampfloker · 2014-09-06, 21:47

Sorry - the next Post is valid...

How can I delete a Wrong Post?

dampfloker · 2014-09-06, 22:53

Hello!

1:
I tried various distances, but every time the train was driving through the hole industry without loading.
So I finally used again the original entries...
In the meantime I have noticed, that the multi-industry-new - <kuid:-19:10165> does load 3 or 4 Wagons at the same time - so I can use this.

2:
Wenn I open the Grf in CCP, it shows me, that the assigned objekt is no bogey but it is a Swedish ATC balis sign (STL 3.1 ATavla ATC-balis lodrät b1 - <kuid:67375:101378>) - that can not work!
And for the Grf there is no bogey in the Downloads...

3:
Another little Problem: At the SJ Shimmns Animated - <kuid:73394:102394> the coupling and air hoses are not exactly near the Wagon - there is a visible distance.

Regards
Dampfloker

lan · 2014-09-07, 09:13

The bogey is the Gkks bogey and does not interfer with any updated items.
The ATC-balis might is an old one that is replaced by vers 3.

I shall look at Shimmns!

Bengan · 2014-09-07, 12:31

Så tar vi en uppsättning av FRUKTNORLIN som texturegrupp.

Texturegruppen på MediaFire i länken nedan

https://www.mediafire.com/?zko88e3o8fqjuth

och en klonad vagn till texturegruppen längst ner här.

dampfloker · 2014-09-07, 15:14

Hello!

When I install "STL Gkks bogey.cdp", there is the "STL 3.1 ATavla ATC-balis lodrät b1" - and that is no bogey!

Regards
Dampfloker

lan · 2014-09-07, 17:38

That is a very old version and you should replace it, and install the new.
The only items supported are thoose in this post:

http://www.e-buzz.se/forum/showthread.php?t=34126

dampfloker · 2014-09-07, 21:11

But there is no "STL 3.1 ATavla ATC-balis lodrät b1"...
Which of that DLs in the thread should I use?

2014-09-06, 21:47	#1
dampfloker Medlem Reg.datum: Jun 2010 Ort: germany Inlägg: 30	Sorry - the next Post is valid... How can I delete a Wrong Post? Senast redigerad av dampfloker den 2014-09-06 klockan 22:56.

2014-09-07, 09:13	#3
lan Veteran Reg.datum: Nov 2001 Ort: Onsala, , Sweden. Inlägg: 8 149	The bogey is the Gkks bogey and does not interfer with any updated items. The ATC-balis might is an old one that is replaced by vers 3. I shall look at Shimmns! __________________ *"Det är kanske för sent att lära sig nåt nytt" - Bengan travesti* LAn

2014-09-07, 17:38	#6
lan Veteran Reg.datum: Nov 2001 Ort: Onsala, , Sweden. Inlägg: 8 149	That is a very old version and you should replace it, and install the new. The only items supported are thoose in this post: http://www.e-buzz.se/forum/showthread.php?t=34126 __________________ *"Det är kanske för sent att lära sig nåt nytt" - Bengan travesti* LAn

2014-09-07, 21:11	#7
dampfloker Medlem Reg.datum: Jun 2010 Ort: germany Inlägg: 30	But there is no "STL 3.1 ATavla ATC-balis lodrät b1"... Which of that DLs in the thread should I use? Senast redigerad av dampfloker den 2014-09-08 klockan 02:58.

Ämnesverktyg
Visa utskriftsvänlig version E-posta den här sidan
Visningsalternativ
Växla till linjär visning Hybrid-visning Växla till trådad visning

2014-09-06, 22:53	#2
dampfloker Medlem Reg.datum: Jun 2010 Ort: germany Inlägg: 30	Hello! 1: I tried various distances, but every time the train was driving through the hole industry without loading. So I finally used again the original entries... In the meantime I have noticed, that the multi-industry-new - <kuid:-19:10165> does load 3 or 4 Wagons at the same time - so I can use this. 2: Wenn I open the Grf in CCP, it shows me, that the assigned objekt is no bogey but it is a Swedish ATC balis sign (STL 3.1 ATavla ATC-balis lodrät b1 - <kuid:67375:101378>) - that can not work! And for the Grf there is no bogey in the Downloads... 3: Another little Problem: At the SJ Shimmns Animated - <kuid:73394:102394> the coupling and air hoses are not exactly near the Wagon - there is a visible distance. Regards Dampfloker

2014-09-07, 15:14	#5
dampfloker Medlem Reg.datum: Jun 2010 Ort: germany Inlägg: 30	Hello! When I install "STL Gkks bogey.cdp", there is the "STL 3.1 ATavla ATC-balis lodrät b1" - and that is no bogey! Regards Dampfloker